Trane Pivot Smart Thermostat Operation Manual

The Trane Pivot Smart Thermostat is a programmable thermostat with a color touch-screen and intuitive user interface for easy operation. It supports remote access via iOS or Android mobile devices. Key elements include compatibility with heat/cool, dual fuel, heat only, cooling only, and heat pump systems. It uses proprietary PI control schemes for comfort and energy efficiency. Below are the key specifications and operation instructions.

1. Key Specifications 2. Operation Instructions 2.1. Initial Setup 2.2. Home Screen Navigation 2.3. Scheduling and Presets 2.4. Settings Screen 2.5. Advanced Features 2.6. Troubleshooting 3. Installation Instructions 3.1. Pre-Installation 3.2. Wiring Diagrams 3.3. Configuration Options 4. Calculation Tool

Key Specifications

Type: Programmable smart thermostat with color touch-screen
Compatibility:
- Heat/cool, dual fuel, heat only, cooling only, heat pump systems
- iOS/Android mobile app for remote access
Power:
- 24 VAC ±10%, 60 Hz, 5 VA max
Temperature Range: Auxiliary heat lockout: 32°F to 70°F; Compressor heat lockout: 5°F to 70°F; Operating: 32°F to 104°F (0°C to 40°C)
Dimensions: Display: 4.15" x 2.65" (4.3" diagonal); Overall: 4.15" H x 4.15" W x 1.0" D (105 mm x 105 mm x 25 mm)
Features:
- Setpoint deadband: 1°F to 9°F (default 2°F)
- Humidity: 5% to 95% RH (non-condensing)
- Compliance: UL 873, FCC Part 15 Class B, ICES-003, CE

Operation Instructions

Initial Setup

1. Power On: Connect to HVAC system; sequence lasts 90–120 seconds; calibrate screen if prompted (5s window).
2. Set Basics: Follow prompts for language, time, date, temperature scale.
3. Register for Remote Access: Download Trane Pivot app (iOS/Android); create account; add thermostat using PIN/QR code.
4. Add Users: In app, tap Users > New User; enter details and scan QR/PIN.
5. Weather Setup: Set local weather via app after registration.
6. Enable Scheduling: Menu > Schedules > Enable.

Home Screen Navigation

1. Display: Indoor temperature, RH, setpoints, mode (heating/cooling/off), weather, network status, icons for occupancy/alerts.
2. Controls: Touch mode/fan/schedule; up/down arrows for setpoints.
3. Menu Access: Tap menu for Schedules, Setpoints, Occupancy Override, System Info.
4. Customization: Settings > Screen Layout: Select up to two apps for home screen (e.g., Schedules, Weather).

Scheduling and Presets

1. View/Edit: Menu > Schedules; enable if off; adjust periods per day (up to 4: Wake, Leave, Return, Sleep).
2. Add Periods: Tap Add > Set start time, heating/cooling setpoints > Save (max 4/day).
3. Delete Periods: Tap period > Delete > Save.
4. Setpoints: Menu > Schedule Setpoints > Adjust occupied/unoccupied heat (default 70°F)/cool (75°F); deadband (1-9°F, default 2°F).
5. Occupancy Override: Menu > Occupancy Override > Set duration and setpoints.
6. Temporary Adjustments: Arrows on home screen; tap occupancy icon in unoccupied mode.

Settings Screen

1. Access: Menu > Settings.
2. Thermostat: Scale (°F/°C), deadband, calibrate sensors (±°F).
3. Screen: Brightness, backlight timeout, screen saver, themes; layout for home apps.
4. Weather: Local setup via app.
5. SW Upgrades: Manual check/install.
6. PIN Access: Set restrictions; enter for functions.
7. Emergency Heat: Enable for heat pumps; lockout range 5-70°F.

Advanced Features

1. Mobile App: Manage thermostats/users/buildings; alerts (high/low temp); remote control/updates.
2. Alerts: Set triggers in app > Thermostat > Alerts (heating/cooling issues).
3. PIN Security: 4-digit code; set via app or thermostat.
4. Occupancy Override: Temporary mode change with duration.
5. System Info: Alerts, notifications, details.
6. Customization: Home layout; energy features like deadband/lockouts.

Troubleshooting

No Remote Access: Verify Wi-Fi; re-register with PIN.
Schedule Not Showing: Enable in Menu > Schedules.
Alerts Not Triggering: Set in app > Alerts.
Screen Problems: Adjust brightness/timeout in Settings > Screen.
Software Issues: Settings > SW Upgrades.
Wiring/Grounding: Verify installation; consult qualified personnel.
General: Contact Pivot Support at (833) 222-3201.

Installation Instructions

Warning: Qualified personnel only; hazards in HVAC equipment risk death/injury. Follow local codes; proper wiring/grounding required.

Pre-Installation

Location: Interior wall, good circulation; avoid drafts/sun/heat. Wi-Fi within 30 ft (≤3 walls) or Ethernet.
Contents: Thermostat, sub-base, screws/anchors, guide, RJ-45 holder.
Tools: Drill, screwdriver, level.
Power: 24 VAC, 60 Hz, 5 VA max.

Wiring Diagrams

Standard low-voltage terminals (18 AWG max):

Terminal	Connection
R	24V Power
C	Common
G	Fan
Y1/Y2	Cool Stages
W1/W2	Heat Stages
O/B	Changeover (HP)
AUX1/AUX2	Accessories (Humidifier/Dehum)
ODT	Outdoor Temp Sensor
RS1	Binary Input (Occupancy)

Note: Up to 2 stages; consult installer for system-specific diagrams.

Configuration Options

Mount: Level sub-base; connect wires, snap face.
Power Up: Follow prompts for basics.
Installer Menu: Menu > Service > Technician Access (5s) > Proceed > Service Menu: Set equipment type, changeover (auto/manual, 2°F deadband), staging (1-2, airflow %), sensors (ODT/remote), accessories (humidifier/dehum), comfort (RH/fan), lockouts (OAT).
App: Register; add users/alerts.
Test: Calibrate screen; verify modes.

Calculation Tool

Estimate monthly energy savings from scheduling (assumes 1% savings per °F setback; 30 days/month).